- 20 -
7.3 F/C
The F/C button light is always on after turning on (the LED light is white). Short press the F/C key to
switch between Fahrenheit and Celsius. The default state is Fahrenheit. After the unit is switched, the value
will be converted.
7.4 Prime
Prime is a touch button. There are two LED lights in the middle of the touch button, which are white
LED (turn on) and red LED. After pressing this button, the feeding motor continues to work, the red LED
lights up; until the temperature rises 10
°
F or presses again the button to cancel the forced feeding, the motor
stops working, LED light will change to white.
Note
：
You can hear a beep if the above 3 buttons are effective.
7.5 Control Knob
：
The temperature setting option is activated when the control knob EC11 is pressed
and
will flash in 1HZ frequency while it activated.
The temperature will increase when you turn the knob in clockwise(temperature will increase 5
°
F in 15 degree
clockwise and will increase 120
°
F after one circle).The temperature will decrease when you turn the knob in
anticlockwise (temperature will decrease 5
°
F in 15 degree clockwise and will decrease 120
°
F after one circle).
The temperature setting range initially displays the SOMKE mode
.
Middle temperature setting range is 180
°
F~450
°
F.
the setting temperature is above 450
°
F
（
In order to see clear ,when you turn on the control knob,
is always on,and it will start to flash
after 0.5 second of your setting,
will flash all the time during temperature setting.)
Press EC11 again, or wait for 5 seconds without operating EC11, the current selected temperature is
determined. Exit the setting activation state. Press the OK button to maintain the SET icon, and set the
temperature for 2 seconds, then return to the real temperature (to facilitate user operation),
off.
