Exorigo-Upos FP-T88FVA, Руководство пользователя

Страница: 21 / 33

User manual - FP-T88FVA ONLINE
21
In the event of replacement of a roll into a new one, note that the remaining of the waste
paper roll should be removed.
4.6. CHANGING THE WIDTH OF THE PAPER
Using the paper reducer included with the printer, it is possible to use a 58 mm wide
thermal paper roll. To insert paper reducer:
1. Open receipt cover.
2. Put the reducer in the paper container as shown below.
3. To securely attach the reducer, you can screw it to the base of the set (screw not
included in the set).
4. Insert 58 mm paper and close the cover.
To return to the wide width of 80 mm roll paper, unscrew the fastening screw if you go,
and also pull out the reducer by pulling it.
NOTE!
After change the width of the thermal paper rolls, remember to set the
the printer configuration parameters. This operation can be done only by
an authorized service.
4.7. SERVICE ACTIONS
The printer requires periodical maintenance and once every two years, the service
inspection. Systematic maintenance of the device guarantees longer reliability of the
device. Recommended maintenance procedures should be performed no less frequently
than once a year, although it depends on the environment of the device’s operation (e.g.
at higher dusting, the printer should be subject to service maintenance more often).
Failure to conduct the activities may even lead to damage of the printer due to user’s
fault and result in loss of warranty. And in the event of failure to conduct the service
inspection, the user is exposed to sever financial consequences. For the service
technician’s arrival, the user should prepare the cash register book each time.
Paper
container