Copyright ©
2018 Exor International S.p.A.
. All Rights Reserved.
70
eCC3800
Series User Manual
Chapter 4: BIOS Setup
PCH-IO Configuration
This section is used to configure PCH-IO configuration.
State After G3
Configures the power state when power is re-applied after a power failure
(G3 state).
USB2.0 Power State in Standby
Configures the USB 2.0 power state in standby mode.
USB3.0 Power State in Standby
Configures the USB 3.0 power state in standby mode.
Chipset
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
SATA Device Options Settings
PCH-IO Configuration
SATA And RST Configuration
Security Configuration
HD Audio Configuration
State After G3
USB2.0 Power State in Standby
USB3.0 Power State in Standby
LAN3
LAN2
LAN1
MINIPCIE(WIFI1)
MINIPCIE(CN2)
M.2
[S0 State]
[Power Off]
[Power On]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
►
►
►
LAN1 to LAN3
Enables or disables LAN1 to LAN3 controllers.
MINIPCIE(WIFI1) and MINIPCIE(CN2)
Enables or disables the PCI Express root port for WIFI1 and CN2.
M.2
Enables or disables the M.2 connector.