Exodraft RSV, Руководство пользователя

Страница: 7 / 28

UK | 7
3112001_RSV_UK
Warning
To minimise the risk of fire, electric shock, personal injury
and/or damage to the product please observe the following:
• Please always read the manual and only use the product in accordance with the
manufacturer’s instructions. If in doubt, contact one of the Exodraft specialized dealers.
• All installations must be carried out by properly qualifi ed personnel in accordance with
national legislation and regulations.
• This product must be earthed. Get assistance from an qualifi ed electrician when in doubt.
• The chimney fan must always remain switched on when the fireplace is in use.
• Ensure that the chimney has been swept before mounting the fan to avoid chimney fires.
• Prior to servicing the product, disconnect the power and ensure that it cannot accidentally
be reconnected.
• Exodraft always recommends the use of a smoke alarm when a solid fuel fireplace is
installed.
• If the Exodraft fan system has been designed for solid fuel/multi fuel installations, please
ensure that the design meets the requirements of BS EN15287-1. If this cannot be achie-
ved, a smoke alarm must be installed in the same room as the heat appliance.
• Note! Fans serving biomass boilers must be cleaned more often due to extensive residue/
soot building. It is essential that a regular inspection and cleaning schedule is implemen-
ted, especially in the early days of usage, to experience how often regular inspections and
cleaning should be carried out.
UK
Your energy. Optimized.
Product information
An Exodraft RSV chimney fan is designed with vertical discharge.
The fan must be installed on top of a chimney and creates a negative pressure (suction) along the full
length of the flue.
The fan can be used in connection with all types of fuel burning appliances and is especially well-suited to
appliances burning solid fuel, such as wood-burning fireplaces and stoves and biomass or solid-fuel boilers.
The fan is part of an Exodraft system and should be connected to an Exodraft controller for optimal effect.
Incorrect firing may result in problems with soot, chimney fires, etc. which might damage the product.
Please check out this site for advice about lighting and maintaining a fire:
www.exodraft.com
Scope of supply
• Exodraft RSV chimney fan
• Mineral wool mat for vibration-free mounting
• Packet with location brackets, safety wire, bolts and nuts
(wing screws included - to be used where allowed)
• Armoured hose
• Installation manual and user instructions
Accessories and spare parts
The table below shows the accessories and spare parts available for the RSV-models.
Accessories* Spare parts
Flanges (for steel chimneys) Motors
Cover Plates (for steel and brick chimneys) Impellers and axial vanes
RSD - Dilution bolts (for brick chimneys) Mineral wool mats
Rainshield SVD-RS - Vibration dampers (for flanges on steel chimneys)
Capacitors
*This manual does not describe the specific use of accessories. We refer to the separate manuals for such components.
For more details contact your Exodraft dealer.