Exodraft RSV, Руководство пользователя

Страница: 19 / 28

UK | 19
3112001_RSV_UK
6
Use the safety wire to secure the fan to the
chimney. Apply the supplied self-cutting screw
in steel chimney. Then mount the wire through
the designated hole in the base plate and into the
wire lock.
Tighten the safety wire slightly and then tighten
the wire lock, so that the chimney fan is secured
when opened for service and cleaning purposes.
The isolation switch should be fitted on the side
of the chimney, so it is easily accessible when
servicing the fan.
The armoured cable should be connected into the
underside of the isolator and up into the switch
via the cable gland.
RSV og GSV og RSVG
RSV og GSV og RSVG
7
Before taking the fan into operation, please make
sure that:
• the nuts in the location brackets have been
tightened.
• the safety wire has been fastened to the fan
and chimney.
• the safety wire and the wire lock have been
tightened.
• the connection on the armoured cable has
been fastened. The armoured cable must hang
straight down from the fan.
• the chimney fan is securely closed.
• when opening/closing the fan, support the
upper part with your hand.
NOTICE!
The end-user should be made aware of
the fact that the chimney fan must always remain
switched on when the fireplace/boiler is in use.
RSV og GSV og RSVG
RSV og GSV og RSVG
RSV og GSV og RSVG
8
To avoid rainwater from entering the chimney fan
the slots and holes must be sealed with silicone.
Do not seal the drain holes!
RSV og GSV og RSVG
RSV og GSV og RSVG
RSV og GSV og RSVG