background image

UK  |  

9

3112016_EFC18_UK

Technical specifications

The Exodraft EFC18 flue gas control is a 9-speed control with integrated temperature monitoring for safety 

switching and automatic start/stop of the chimney fan. The control also has a start function for producing a 

stronger chimney draught to ensure easy lighting. The EFC18 control comprises control console and tempe-

rature sensor for mounting under the chimney fan. The chimney fan is activated by pressing the button on 

the front of the control.

During the first seven minutes the start function ensures maximal chimney draught, enabling lighting in 

the room without soot and dust. Following the 7-minute start operation the chimney fan will return to the 

last set level. The control button has to be pressed again if wood is added. This runs the chimney fan for 3 

minutes at maximal speed. The door or glass panel can now be opened without fumes escaping and the 

added wood lights more quickly. The control also has temperature monitoring under the chimney fan. If 

someone forgets to switch on the chimney fan it is force-switched. This provides protection from overhea-

ting of the chimney fan, but does not replace manual switching. 

Technical data

Description

EFC18

H x W x D [mm]

85 x 85 x 32,5

Max. load

1.2 A 

Fuse

T 1.25 A

Voltage

230 VAC, 50 Hz

Sensor workspace

-50 °C to +400 °C

Temperature sensor

0°C to +40°C

Density class

IP 30

Material

ABS

Colour

White

Suitable for the following

chimney fans

RS9/12/14/16 and RSV9/12/14

Содержание EFC18

















Отзывы: