Exmark Turf Ranger FMD524 Скачать руководство пользователя

Страница: 8 / 48

- 3 -

DANGER

POTENTIAL HAZARD

♦

In certain conditions gasoline is extremely flammable

and highly explosive.

WHAT CAN HAPPEN

♦

A static charge can ignite gasoline vapors. A fire or

explosion from gasoline can burn you, others, and
cause property damage.

HOW TO AVOID THE HAZARD

♦

Purchase and store gasoline only in an approved

container.

♦

Always place gasoline containers on the ground away

from your vehicle before filling.

♦

Do not fill gasoline containers inside a vehicle or on a

truck or trailer bed because interior carpets or plastic
truck bed liners may insulate the container and slow
the loss of any static charge.

♦

When practical, remove gas-powered equipment from

the truck or trailer and refuel the equipment with its
wheels on the ground.

♦

If this is not possible, then refuel such equipment on a

truck or trailer from a portable container, rather than
from a gasoline dispenser nozzle.

♦

If a gasoline dispenser nozzle must be used, keep the

nozzle in contact with the rim of the fuel tank or
container opening at all times until fueling is complete.

WARNING

POTENTIAL HAZARD

♦

Gasoline vapor can collect inside enclosed trailers and

may be ignited by electrical sparks or hot
engine/exhaust components.

WHAT CAN HAPPEN

♦

Explosion and fire may occur, resulting in property

damage, personal injury, and/or death.

HOW TO AVOID THE HAZARD

♦

Provide adequate ventilation of any enclosed trailer to

prevent build up of gasoline vapors, especially at floor
level.

♦

Refuel only outdoors, never inside an enclosed trailer.

♦

Be sure all fuel tanks and gasoline storage containers

have proper caps installed to prevent spillage and
minimize vapor escaping into the trailer.

♦

Do not place any equipment that is leaking gasoline in

an enclosed trailer.

Содержание Turf Ranger FMD524

















































Результаты поиска

Содержание Turf Ranger FMD524

Отзывы:

Похожие инструкции для Turf Ranger FMD524

Бренды по названию

Популярные бренды

Exmark Turf Ranger FMD524, Руководство оператора

Результаты поиска

Содержание Turf Ranger FMD524

Отзывы:

Похожие инструкции для Turf Ranger FMD524

Бренды по названию

Популярные бренды