Exmark Turf Ranger FMD524 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 48

background image

- 19 -

4.3.4

Drive Wheel Engagement/Turning: With drive levers locked in “neutral”, shift
speed control lever to desired forward speed.

Slowly squeeze and hold both drive levers in the neutral position and rotate both
neutral lock latches from the neutral lock position to the forward position.

DO NOT squeeze both drive levers all the way back, this will cause the drive
wheels to engage in the reverse direction.

For straight ahead motion: S

moothly release both drive levers to engage drive

wheels.

For turning:

Squeeze the right hand drive lever to turn right and the left hand

drive lever to turn left. To make a “zero turn”, squeeze either the left hand or the
right hand drive lever back into the reverse position while the opposite drive lever
is in a forward position at an equal but opposite speed.

For reverse: S

queeze both drive levers into the reverse position.

For smooth operation of this machine, avoid quick, jerky movements of the drive
levers. Move the drive levers smoothly and deliberately.

4.3.5

To

Stop: Squeeze drive levers back to the “neutral” position. Move the neutral

lock latches into the “neutral lock” position and release drive levers. Move the
speed control lever to the neutral position.

4.3.6

PTO

Engagement:

DANGER

POTENTIAL HAZARD

♦

The rotating blades under the mower deck are

dangerous.

WHAT CAN HAPPEN

♦

Blade contact can cause serious injury or kill you.

HOW TO AVOID THE HAZARD

♦

DO NOT

put hands or feet under the mower or mower

deck when the PTO is engaged.

DANGER

POTENTIAL HAZARD

♦

An uncovered discharge opening will allow objects to

be thrown in an operator’s or bystander’s direction.
Also, contact with the blade could occur.

WHAT CAN HAPPEN

♦

Thrown objects or blade contact can cause serious

injury or death.

HOW TO AVOID THE HAZARD

♦

Never operate the mower with the discharge deflector

raised, removed, or altered unless there is a grass
collection system or mulch kit in place and working
properly.

The PTO switch engages the cutting blades. Be sure that all persons are clear of
mower deck and discharge area before engaging the PTO.

Set throttle to “midway” position. The switch must be

pulled out

to the “

Rotate

’

position to engage the blades. Accelerate to full throttle to begin mowing.

4.3.7

PTO

Disengagement: Push in on the switch

to the “

Stop

” position to stop the

blades.

«
...
22
23
24
25
26
...
»

Содержание Turf Ranger FMD524

















































Отзывы:

Нет отзывов

Похожие инструкции для Turf Ranger FMD524

Бренд: Snapper Страницы: 32

Бренд: Troy-Bilt Страницы: 28

FREEDOM Z SFZ36-17KA

Бренд: Scag Power Equipment Страницы: 69

Greens King V Plus

Бренд: Jacobsen Страницы: 224

COMPANION 27826

Бренд: COMPANION Страницы: 84

Бренд: Oleo-Mac Страницы: 344

Бренд: P.Lindberg Страницы: 36

Commercial Front Cut Rider YHRLD211

Бренд: Yazoo Страницы: 26

Бренд: RHINO Страницы: 23

Бренд: Ozito Страницы: 8

Flex Cut RMR 230 H

Бренд: Wiedenmann Страницы: 55

Бренд: Yard-Man Страницы: 36

GRASS 1265 ZSBW

Бренд: Garland Страницы: 172

Бренд: Craftsman Страницы: 56

Бренд: Dixie Chopper Страницы: 124

Бренд: Husqvarna Страницы: 52

Бренд: Husqvarna Страницы: 48

Бренд: Husqvarna Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды