Exmark QUEST QZS708GEM50200 Скачать руководство пользователя страница 24

Страница: 24 / 72

Operation

The Safety Interlock System

CAUTION

If the safety interlock switches are disconnected
or damaged the machine could operate
unexpectedly causing personal injury.

•

Do not tamper with the interlock switches.

•

Check the operation of the interlock switches
daily and replace any damaged switches
before operating the machine.

Understanding the Safety Interlock
System

The safety interlock system is designed to prevent the
engine from starting unless:

•

The blades are disengaged.

•

The motion control levers are moved outward to
the neutral locked position.

•

The parking brake is engaged.

The safety interlock system is designed to initiate
engine shutdown when:

•

The parking brake is disengaged and the operator
gets off machine.

•

The PTO is engaged and the operator gets off
machine.

Check Safety Interlock System

Service Interval: Before each use or daily

Important:

It is essential that operator safety mechanisms be connected and in proper operating

condition prior to use.

Note:

If machine does not pass any of these tests,

Do Not

operate. Contact an Authorized Service Dealer.

Note:

To prevent engine cut-outs on rough terrain, the seat has a 1/2 second time delay before the engine

begins to shutdown.

Check the Normal Engine Starting Chart

System

Parking Brake

PTO

Motion Control

Levers

Operator

Outcome

Engaged

Disengaged

(Blades)

Both levers out

(neutral lock)

In seat or out

of the seat

Starter should

crank

State of System

Содержание QUEST QZS708GEM50200









































































Результаты поиска

Содержание QUEST QZS708GEM50200

Отзывы:

Похожие инструкции для QUEST QZS708GEM50200

Бренды по названию

Популярные бренды

Exmark QUEST QZS708GEM50200, Руководство оператора

Результаты поиска

Содержание QUEST QZS708GEM50200

Отзывы:

Похожие инструкции для QUEST QZS708GEM50200

Бренды по названию

Популярные бренды