Exmark QUEST QZS708GEM50200, Руководство оператора

Страница: 27 / 72

Operation
Driving Forward or Backward
The throttle control regulates the engine speed as
measured in rpm (revolutions per minute). Place
the throttle control in the Fast position for best
performance. Always operate in the Fast (full throttle)
position.
CAUTION
Machine can spin very rapidly by positioning one
lever too much ahead of the other. Operator may
lose control of the machine, which may cause
damage to the machine or injury.
• Use caution when making turns.
• Slow the machine down before making sharp
turns.
Forward
1. Move the levers to the center, unlocked position.
2. To go forward, slowly push the motion control
levers forward (Figure 12).
g236810
Figure 12
1. Neutral lock position
(handles out) 4. Forward
2. Neutral operate position
(handles in) 5. Neutral (operate)
3. Front of machine 6. Reverse
To go straight, apply equal pressure to both
motion control levers (Figure 12 and Figure 13).
g008952
Figure 13
To turn, pull back on the motion control
lever toward the direction you want to turn
(Figure 12 and Figure 13).
The farther you move the motion control levers
in either direction, the faster the machine will
move in that direction.
To stop, pull the motion control levers to neutral.
Backward
Note:
Always use caution when backing up and
turning.
1. Move the levers to the center, unlocked position.
2. To go backward, slowly pull the motion control
levers rearward ( and Figure 14).
27