background image

General Warranty Conditions and Products Covered

Exmark Mfg. Co. Inc. and its affiliate, Exmark Warranty Company, 
pursuant to an agreement between them, jointly warrant on the terms and 
conditions herein, that we will repair, replace or adjust any part on these 
products and found by us (in the exercise of our reasonable discretion) to 
be defective in factory materials or workmanship.

This warranty may only be assigned or transferred to a second (or third) 
owner by an authorized Exmark dealer. The warranty period commences 
upon the date of the original retail purchase.

Commercial Warranty Conditions

This warranty applies to Exmark Pioneer S-Series turf equipment sold in 
the U.S. or Canada for a period of two years for commercial usage.

This warranty includes the cost of parts and labor for a period of two 
years. This warranty does not cover pickup and delivery charges to and 
from any authorized Exmark Service Dealer.

Consumer Warranty Conditions

This warranty applies to Exmark Pioneer S-Series turf equipment sold in 
the U.S. or Canada for a period of four years or 500 hours (whichever 
occurs first) for residential usage.

Residential usage means use of the product on the same lot as your home. 
Use at more than one location is considered commercial use, and the 
commercial use warranty detailed above would apply.

This warranty only includes the cost of parts and labor.  For the first 
warrantable service repair, Exmark will cover up to $45 for associated 
pick-up and delivery charges to and from any authorized Exmark Service 
Dealer. Additional transportation charges may apply, contact your Dealer 
for details.

Warranty Exceptions

Warranty Exceptions

Warranty Period

• Bags, Belts and Tires

90 days

• Battery

1 Year Prorated

• Engine

*

* The Engine warranty is covered by the engine manufacturer.  Please 
refer to the engine manufacturer’s warranty statement that is included in 
the literature packet.

Items and Conditions Not Covered

This warranty does not cover the following:
• Any damage or deterioration due to normal use, wear and tear, or

exposure.

• Cost of regular maintenance service or parts, such as filters, fuel, 

lubricants, tune-up parts, and adjustments.

• Any product or part which has been altered or misused or required 

replacement or repair due to normal wear, accidents, or lack of proper
maintenance as set forth in the maintenance section of the operator’s
manual.

• Any repairs necessary due to use of parts, accessories or supplies, 

including gasoline, oil or lubricants, incompatible with the turf 
equipment or other than as recommended in the operator's manual or 
other operational instructions provided by Exmark.

There are no other express warranties except for engine and special 
emission system coverage.

All warranty work must be performed by an authorized Exmark Service 
Dealer using Exmark approved replacement parts.

Instructions for Obtaining Warranty Service

The product must be registered with original proof of purchase by an 
Exmark Service Dealer before obtaining any warranty service.

Contact any Exmark Service Dealer to arrange service at their dealership. 
To locate a dealer convenient to you, access our website at 
www.exmark.com. U.S. or Canada customers may also call 
402-223-6375.

If for any reason you are dissatisfied with the Service Dealer’s analysis or 
with the assistance provided, contact us at:

Exmark Customer Service Department
The Exmark Warranty Company
2101 Ashland Avenue
Beatrice, NE 68310
402-223-6375 or
[email protected]

Owner’s Responsibilities

If your product requires warranty service it must be returned to an 
authorized Exmark service dealer within the warranty period. This 
warranty extends only to turf equipment operated under normal 
conditions. You must read the operator’s manual. You must also properly 
service and maintain your Exmark product as described in the operator’s 
manual. Such routine maintenance, whether performed by a dealer or by 
you, is at your expense.

General Conditions

The sole liability of Exmark and Exmark Warranty Company with respect 
to this warranty shall be repair or replacement of defective components as 
set forth herein. 

Neither Exmark nor Exmark Warranty Company 

shall be liable for any incidental or consequential loss or damage.

Such damages include but are not limited to:
• Expenses related to gasoline, oil or lubricants.
• Travel time, overtime, after hours time or other extraordinary repair

charges or charges relating to repairs or replacements outside of 
normal business hours at the place of business of the authorized 
Exmark Service Dealer. 

• Rental of like or similar replacement equipment during the period of

any warranty, repair or replacement work.

• Any telephone or telegram charges or travel charges.
• Loss or damage to person or property other than that covered by the

terms of this warranty.

• Any claims for lost revenue, lost profit or additional cost as 

a result of a claim of breach of warranty.

• Attorney's fees.

No Claim of breach of warranty shall be cause for cancellation or 
rescission of the contract of sale of any Exmark mower.

All implied warranties of merchantability (that the product is fit for 
ordinary use) and fitness for use (that the product is fit for a 
particular purpose) are limited to the duration of the express 
warranty.

Some states do not allow exclusions of incidental or consequential 
damages, or limitations on how long an implied warranty lasts, so the 
above exclusions and limitations may not apply to you.

This warranty gives you specific legal rights, and you may also have 
other rights which vary from state to state.

Pioneer S-Series Turf Equipment

2 Year Limited Commercial Warranty

4 Year or 500 Hours Limited Consumer Warranty

G4500-748_B

51

 

Содержание PIONEER S-SERIES Operators

























































Отзывы: