Exmark Navigator NAV20KC, Руководство оператора

Страница: 11 / 48

- 6 -
1.4.7 Never operate the mower with damaged guards, shields, or covers. Always
have safety shields, guards, switches, and other devices in place and in proper
working condition.
1.4.8 DO NOT change the engine governor settings or overspeed the engine. Operating
an engine at excessive speed may increase the hazard of personal injury.
1.4.9 Disengage PTO before starting engine.
1.4.10 Start the engine carefully with feet well away from the blades.
1.4.11 Keep hands, feet, and clothing away from rotating parts while the mower is being
operated.
1.4.12 Stop engine, wait for all moving parts to stop, and remove key:
•
Before checking, cleaning or working on the mower.
•
After striking a foreign object (inspect the mower for damage and make
repairs before restarting and operating the mower).
•
Before clearing blockages.
•
Whenever you leave the mower.
Stop the engine and wait for all moving parts to stop:
•
Before refueling.
•
Before dumping the grass catcher.
1.4.13 Before stopping the engine, place the throttle control midway between the “slow”
and “fast” positions. Allow the engine to run a minimum of 15 seconds; then stop
the engine.
1.4.14 The fuel system is provided with a shut-off valve. Shut off the fuel:
•
When the machine will not be used for a few days.
•
During transport to and from the job.
•
When parked inside a building.
1.4.15 This mower was designed for one operator only. Keep all others away from
mower during operation.
1.4.16 Do Not mow with the grass catcher door or the grass catcher raised, removed or
altered.
1.4.17 Do Not operate mower under the influence of alcohol or drugs.
1.4.18 Use extra care when approaching blind corners, shrubs, trees, or other objects
that may obscure vision.
1.4.19 If jump starting is required:
a) connect the positive (+) power cable from the positive post on the booster
battery to the positive terminal post on the starter solenoid switch (this post
has the positive battery cable attached to it).
b) connect the negative or ground cable (-) from the negative post on the
booster battery to the engine block as far away from the battery as possible.
c) disconnect battery cables in the reverse order after starting.
1.5 MAINTENANCE AND STORAGE
1.5.1 For engine maintenance, follow the engine manufacturer’s recommendations
precisely as stated in the engine manual.
1.5.2 Disconnect the battery cable from the negative battery post when the unit will be
allowed to sit for more than 30 days without use.