Exmark Metro HP страница 24 Скачать руководство пользователя | Manualshive

Страница: 24 / 44

background image

- 19 -

For straight ahead motion, smoothly release both drive levers to engage drive
wheels.

Squeeze the right hand drive lever to turn right and the left hand drive lever to
turn left (See Section 4.1.2).

4.3.6

To Stop: Squeeze drive levers back to engage brakes. Move neutral lock/park
brake latches into the “park brake” position and release drive levers. Shift
transmission to neutral.

DANGER

POTENTIAL HAZARD

♦

The rotating blades under the mower deck are

dangerous.

WHAT CAN HAPPEN

♦

Blade contact can cause serious injury or kill you.

HOW TO AVOID THE HAZARD

♦

DO NOT

put hands or feet under the mower or mower

deck when the blades are engaged.

4.3.7

Blade Engagement: Be sure that all persons are clear of mower deck and
discharge area before engaging the blades. Set throttle to “midway” position.
Push the blade engagement arm forward and down to engage blades.
Accelerate to full throttle to begin mowing (See Section 4.1.4).

4.3.8 Blade Disengagement: Pull upward and back completely on the blade

engagement arm to disengage the blades. (See Section 4.1.4)

4.3.9

Changing Gears

When changing gears,

always

squeeze drive levers and/or engage neutral lock

latches or park brakes. The shift lever may be moved with a knee or by hand.

NOTE: Reverse gear is reverse assist only, the operator must pull the unit
backwards.

4.4 TRANSPORTING

WARNING

POTENTIAL HAZARD

♦

Loading the mower onto a trailer without strong enough

or properly supported ramps could be dangerous.

WHAT CAN HAPPEN

♦

The ramps could collapse causing the unit to fall, which

could cause injury.

HOW TO AVOID THE HAZARD

♦

Use proper ramps that are secured to the truck or trailer.

♦

Keep feet and legs out from under the unit when loading

and unloading.

♦

If necessary, use assistance when loading.

Use a heavy duty trailer to transport the machine. Engage park brakes and
block wheels. Securely fasten the machine to the trailer with straps, chains,
cables or ropes.

Do not rely solely on parking brake

to hold machine on trailer.

Use a safety chain and be sure that the trailer has all necessary lighting and
marking as required by law.

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983

www.mymowerparts.com

«
...
22
23
24
25
26
...
»

Содержание Metro HP













































Отзывы:

Нет отзывов

Похожие инструкции для Metro HP

Бренд: Snapper Страницы: 84

Бренд: Rally Страницы: 28

Бренд: Yard-Man Страницы: 8

Бренд: White Страницы: 20

Бренд: MTD Страницы: 20

Бренд: Earthwase Страницы: 20

Бренд: Tecumseh Страницы: 20

Бренд: Dixon Страницы: 13

Бренд: Sabo Страницы: 88

Бренд: Troy-Bilt Страницы: 40

GF1800 ROPS Cab

Бренд: Kubota Страницы: 19

Бренд: Walker Страницы: 76

Бренд: Walker Страницы: 84

Бренд: Walker Страницы: 84

MT, MTL, MTEFI, MTLEFI

Бренд: Walker Страницы: 100

Бренд: Scotts Страницы: 8

Бренд: Shindaiwa Страницы: 28

Бренд: Ayce Страницы: 42

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды