Exmark Laser Z XP Скачать руководство пользователя страница 7

Страница: 7 / 56

- 2 -

1.3.4

Thoroughly inspect the area where the equipment is to be used and remove all
stones, sticks, wires, bones, and other foreign objects which may damage the
equipment or cause personal injury to the operator or bystanders.

WARNING

POTENTIAL HAZARD

♦

Engine exhaust contains carbon monoxide, which is

an odorless deadly poison.

WHAT CAN HAPPEN

♦

Carbon monoxide can kill you.

HOW TO AVOID THE HAZARD

♦

Do not run engine indoors or in a small confined area

where dangerous carbon monoxide fumes can collect.

DANGER

POTENTIAL HAZARD

♦

In certain conditions gasoline and diesel fuel are

flammable and can be highly explosive.

WHAT CAN HAPPEN

♦

A fire or explosion from gasoline or diesel fuel can

burn you, others, and cause property damage.

HOW TO AVOID THE HAZARD

♦

DO NOT

smoke while refueling, and stay away from an

open flame or where fuel fumes may be ignited by
spark.

♦

Refuel only outdoors.

♦

Store fuel in an approved container and keep it out of

the reach of children.

♦

Add fuel before starting the engine.

Never

remove the

cap of the fuel tank or add fuel when engine is running
or when the engine is hot.

♦

Never fill the fuel tank so that the fuel level rises above

a level that is 1/2” below the bottom of the filler neck to
allow for fuel expansion and prevent fuel spillage.

♦

If fuel is spilled,

DO NOT

attempt to start the engine.

Move away from the area of the spill and avoid
creating any source of ignition until fuel vapors have
dissipated.

Содержание Laser Z XP

























































Результаты поиска

Содержание Laser Z XP

Отзывы:

Похожие инструкции для Laser Z XP

Бренды по названию

Популярные бренды

Exmark Laser Z XP, Руководство оператора

Результаты поиска

Содержание Laser Z XP

Отзывы:

Похожие инструкции для Laser Z XP

Бренды по названию

Популярные бренды