Exmark Laser Z XP Скачать руководство пользователя страница 27

Страница: 27 / 56

- 22 -

CAUTION

POTENTIAL HAZARD

♦

This unit does not have proper turn signals, lights,

reflective markings, or a slow moving vehicle emblem.
These items are required to drive on a public street or
roadway.

WHAT CAN HAPPEN

♦

Driving on a street or roadway without such equipment

is dangerous and can lead to accidents causing
personal injury.

♦

Driving on a street or roadway without such equipment

may also be a violation of State laws and the operator
may be subject to traffic tickets and/or fines.

HOW TO AVOID THE HAZARD

♦

Do not drive a unit on a public street or roadway.

WARNING

POTENTIAL HAZARD

♦

Loading a unit on a trailer or truck increases the

possibility of backward tip-over.

WHAT CAN HAPPEN

♦

Backward tip-over of the unit could cause serious

injury or death.

HOW TO AVOID THE HAZARD

♦

Use extreme caution when operating a unit on a ramp.

♦

Use only a single, full width ramp; DO NOT use

individual ramps for each side of the unit.

♦

If individual ramps must be used, use enough ramps to

create an unbroken ramp surface wider than the unit.

♦

DO NOT exceed a 15

angle between ramp and

ground or between ramp and trailer or truck.

♦

Avoid sudden acceleration while driving unit up a ramp

to avoid tipping backward.

♦

Avoid sudden deceleration while backing unit down a

ramp to avoid tipping backward.

Содержание Laser Z XP

























































Результаты поиска

Содержание Laser Z XP

Отзывы:

Exmark Laser Z XP, Руководство оператора, Страница: 27 / 56

Результаты поиска

Содержание Laser Z XP

Отзывы: