Exmark Frontrunner FR25KD Скачать руководство пользователя | Manualshive

Страница: 25 / 52

background image

20

WARNING

POTENTIAL HAZARD

♦

Loading a unit on a trailer or truck

increases the possibility of tip-over.

WHAT CAN HAPPEN

♦

Tip-over of the unit could cause serious

injury or death.

HOW TO AVOID THE HAZARD

♦

Use extreme caution when operating a

unit on a ramp.

♦

Use only a single, full width ramp; DO

NOT use individual ramps for each side of
the unit.

♦

If individual ramps must be used, use

enough ramps to create an unbroken
ramp surface wider than the unit.

♦

DO NOT exceed a 15

°

angle between

ramp and ground or between ramp and
trailer or truck.

♦

Avoid sudden acceleration while driving

unit on a ramp.

3.4.2 Loading a Unit: Use extreme caution when loading units on trailers or trucks. One

full width ramp is required. If it is not possible to use one full width ramp, use
enough individual ramps to simulate a full width continuous ramp.

Ramp should be long enough so that the angles between the ramp and the ground
and the ramp and the trailer or truck do not exceed 15

°

. A steeper angle may

cause mower deck components to get caught as the unit moves from ramp to
trailer or truck. Steeper angles may also cause the unit to tip. If loading on or
near a slope, position the trailer or truck so it is on the down side of the slope and
the ramp extends up the slope. This will minimize the ramp angle. The trailer or
truck should be as level as possible.

DO NOT

attempt to turn the unit while on the ramp, you may lose control and drive

off the side.
Avoid sudden acceleration when driving on a ramp.

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983

www.mymowerparts.com

«
...
23
24
25
26
27
...
»

Содержание Frontrunner FR25KD





















































Отзывы:

Нет отзывов

Похожие инструкции для Frontrunner FR25KD

Бренд: Kärcher Страницы: 444

Бренд: Ransomes Страницы: 80

Бренд: Ransomes Страницы: 60

Бренд: Ransomes Страницы: 20

Бренд: Ransomes Страницы: 224

Бренд: Bad Boy Страницы: 20

Бренд: Troy-Bilt Страницы: 40

Бренд: Matrix Страницы: 68

Бренд: Ransomes Страницы: 100

Бренд: SaMASZ Страницы: 37

Бренд: Bestgreen Страницы: 10

Бренд: Lux Tools Страницы: 148

Бренд: EarthWise Страницы: 8

Бренд: Cub Cadet Страницы: 44

Бренд: sunjoe Страницы: 16

Бренд: Dolmar Страницы: 25

Бренд: EMAK Страницы: 126

Бренд: Gardena Страницы: 150

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды