Exmark Frontrunner FR25KD Скачать руководство пользователя

Страница: 14 / 52

WARNING

POTENTIAL HAZARD

♦

Hydraulic fluid escaping under pressure

can penetrate skin and cause injury.

WHAT CAN HAPPEN

♦

Fluid accidentally injected into the skin

must be surgically removed within a few
hours by a doctor familiar with this form of
injury or gangrene may result.

HOW TO AVOID THE HAZARD

♦

Make sure all hydraulic fluid hoses and

lines are in good condition an all hydraulic
connections and fittings are tight before
applying pressure to hydraulic system.

♦

The woven guards that protect the

hydraulic hoses may deteriorate and wear
over time. Check the guards frequently
and replace if necessary.

♦

Keep body and hands away from pinhole

leaks or nozzles that eject high pressure
hydraulic fluid.

♦

Use cardboard or paper, not your hands,

to find hydraulic leaks.

♦

Safely relieve all pressure in the hydraulic

system, by placing the motion control
levers in neutral and shutting off the
engine, before performing any work on
the hydraulic system.

WARNING

POTENTIAL HAZARD

♦

Fuel system components are under high

pressure.

WHAT CAN HAPPEN

♦

The use of improper components can

result in system failure, fuel leakage and
possible explosion.

HOW TO AVOID THE HAZARD

♦

Use only approved fuel lines and clamps

for high pressure systems.

1.6 SAFETY SIGNS

1.6.1 Keep all safety signs legible. Remove all grease, dirt and debris from safety

signs and instructional labels.

1.6.2 Safety signs must be replaced if they are missing or illegible.

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983

www.mymowerparts.com

Содержание Frontrunner FR25KD





















































Результаты поиска

Содержание Frontrunner FR25KD

Отзывы:

Похожие инструкции для Frontrunner FR25KD

Бренды по названию

Популярные бренды

Exmark Frontrunner FR25KD, Руководство оператора

Результаты поиска

Содержание Frontrunner FR25KD

Отзывы:

Похожие инструкции для Frontrunner FR25KD

Бренды по названию

Популярные бренды