How to Install
DC Cabling:
1.
Ensure that the ON/OFF switch on the front panel of the Inverterz if OFF
position before you begin the installation.
2.
Connect the negative terminal of the battery to the thick black wire of system
3.
Connect the positive terminal of the battery to the thick red wire of system
AC Cabling:
Plug in the power cord to the mains socket on the wall. The cabling should have
proper earthing. Connect AC input supply to the 3 way terminal of the system such
that the line is connected to ‘L’, neutral is connected to ’N’ and earth is connected
to ‘E’. Input supply should remain ON once the system is installed. Take out from
output socket.
