6
En
gl
is
h
Operating instructions
Note:
Certain selections and functions can be controlled from both the remote control
and the stereo.
Switching on/off
Switch the stereo on by pressing [ ] on the remote control or the stereo.
The message “HELLO” will be displayed as the stereo is switched on and “GOOD BYE”
when it is switched off.
Sound settings
• The volume level can be adjusted by pressing and holding down [ VOL- ] or [ VOL+ ]
on the remote control or by turning the volume knob on the stereo.
• Press [ ] to shut off the volume completely.
Equalizer
Press [ EQ ] on the remote repeatedly to select one of the equalizer settings:
normal
,
classic
,
rock
,
pop
and
jazz
.
CD player
The stereo system CD player supports playback of
CD
,
CD-R
,
CD-RW
and
MP3
discs
.
CD playback
1. Select audio source: Press [ CD ] on the remote control or [ SOURCE ] repeatedly
on the remote control or stereo until “DISC” is shown on the display.
2. Press [
▲
] to open the CD drawer. Insert a CD and then press the button again to
close the drawer.
3. Once the CD has been inserted the first track will be played automatically.
Information about the track being played is shown on the display.
4. Press [ |
◄◄
] or [
►►
| ] repeatedly to change track. Press [ -10 ] or [ +10 ] to skip
forwards or backwards 10 tracks in one go.
5. Hold down [ |
◄◄
] or [
►►
| ] while a track is playing to search backwards or
forwards in the track.
6. Press [
►
|| ] once to pause playback. Press the button again to resume playback.
7. Press [
■
] to stop playback. The number of tracks on the CD and the total duration
of play is shown on the display.