7
Eng
lis
h
Note:
• If there is no signal from DAB, FM, CD, USB, SD Memory Card, BT or AUX for
15 minutes, the main unit will switch off.
• In AUX mode, the main unit will switch to standby mode after about 4 hours
whether there is signal or not. “Auto OFF” will flash on the display 10 minutes
before it goes into standby mode. Press [ INTRO ] (43) to continue playback for
another 4 hours.
• Activate the backlight in standby mode by pressing any button. The light stays on
for about 10 seconds.
• Turn off the product by turning the power switch to the
OFF
position and unplug it.
4.3 Setting the clock
If you are able to receive DAB signals, the clock is set automatically shortly after tuning
into a DAB station. If you can only receive FM stations, the clock must be set manually.
Note:
Manual setting can only be done in standby mode.
Setting the clock manually:
1. Turn on the product using the main power switch (23), the standby indicator (8)
comes on and “Scan time” or “00:00” is displayed.
2. In standby mode, press [ MEMORY ] (10) or (36) until “00”: XX (hours) starts
flashing. Enter the correct time using [
9
] or [
:
] (11) or (28), press [ MEMORY ] to
confirm. Do the same to set the correct minute.
3. Press [ MEMORY ] to confirm and exit the settings mode.
4.4 Setting the timer (using the remote control)
The timer function allows you to switch the product on and off at a desired time.
Activate/deactivate:
1. Press [ TIMER ] (41) until “ON TIMER” is displayed for several seconds and
“00”: XX (hours) starts flashing. Enter the correct hour to activate using [
9
] or [
:
]
(28), press [ TIMER ] to confirm. Do the same to set the correct minute.
2. “OFF TIMER” is displayed for several seconds and “00”: XX (hours) starts flashing.
Enter the correct hour to deactivate using [
9
] or [
:
], press [ TIMER ] to confirm.
Do the same to set the correct minute.
3. Press [ MEMORY ] to confirm.
4. Select the function to be controlled by the timer function using [
9
] or [
:
],
FM
– CD – USB – CARD – DAB
. Press [ TIMER ] to confirm. “Volume 15” flashes for
several seconds, which means it is possible to set the desired volume level upon
activation.
5. A clock symbol appears in the upper left corner of the display when the timer
function is activated.
6. Press [ TIMER ] (41) repeatedly to display the timer settings.
To switch off the timer function: Press [ TIMER ] (41) repeatedly until “Timer on” or
“Timer off” appears on the display.
Содержание BDX600
Страница 83: ...83 ...