7
En
gl
is
h
Clamping through a hole in the tabletop
1. Remove the three rubber pads on the bottom of the stand’s foot
and remove the screws.
2. Screw the base plate (P-C) securely onto the foot using the three screws.
3. Remove the screw that holds the plate onto the end of the clamping screw.
Remove the plate and unscrew the clamping screw.
4. Drill a hole in the tabletop (Ø min 10 mm, max 70 mm).
5. Pass the clamping screw through the plate washer (P-D), through the hole
from the underside of the tabletop and screw it tightly into the stand’s foot.
Содержание 38-5546
Страница 2: ...2...