45200 OAK CEILING RACK
ASSEMBLY INSTRUCTIONS
Contents
2 x Wooden Parallel Bars
2 x Ceiling/Joist Hooks
16 x Hanging Links
2 x End Hooks
4 x Pan Hooks
2 x Swivel Hooks
2 x Spacer Fixings & Screws
Assembly
Remove all packaging and check contents.
Place one of the end hooks at each end in between the parallel bars,
aligning the holes in the bars with the hole in the hooks. Secure the
parallel bars together placing the spacer fixings through one bar, then the
end hook and then through the second bar.
Determine where your ceiling joists are located. Screw the large
ceiling/joist hooks directly into the joists at the appropriate points.
Your 45200 rack is supplied with 16 hanging links. The height of your
ceiling rack is dependent on how many links you use.
Hang the required amount of hanging links from the ceiling/joist hooks
and attach the ceiling rack by using the two end hooks.
Insert pan hooks and swivel hooks as required, from above, into the
parallel bars.
IMPORTANT
:
The maximum permissible load weight of this rack is 20kg / 44lbs.
Always try to evenly distribute the hanging of items; this will helps spread
the load.
The Old Grain Store
Unit 6 Hullockpit Hill
Newnham
Nr Baldock
Hertfordshire SG7 5DP
England
www.hahn-kitchnenware.com
