EN
G
LIS
H
Assembly:
1. Insert the track on the holders backside against the attachment on the bendable arm
and then slide the holder downward.
2. Clean the glass surface where the suction cup is being mounted and remove the plastic
protection from the suction cups mounting bond.
3. Tilt the lock lever (7) against you and press the suction cup against the clean glass sur
face. Then press down the lock lever completely until the suction cup is attached to the
glass surface.
4. Aim and bend the arm to desired position. Adjust the holders horizontal angle by tur
ning the holder.
5. Push the opening button (3) to open the side clamps.
6. Place the mobile phone (max. width 115 mm) in the middle of the holder and push to
gether the side clamps carefully until the mobile phone is steady. The feet can
be
un
folded to give the telephone better support downward.
7. To remove the mobile phone, press the opening button (3) at the same time you hold
the telephone with the other hand.
8. Remove the arm from the glass surface by lifting up the lock lever and then pull the pull
tag straight up until the suction cup is loose.
Disposal
Follow local ordinances when disposing of this product. If you are unsure about how to
dispose of this product contact your municipality.
Specifications
Arm length
16 cm (36-2947)
27 cm (36-2948)
Max. width (mobile telephone)
115 mm
Temperature Range
-50°C - 120°C