3. Preservation and Storage Instructions
Page
5
of
28
3. Preservation and Storage Instructions
•
Do not remove the heater from its packing until you are ready to assemble and
operate it for the first time.
•
After use, store the equipment in an inside location that is dry, clean and well
ventilated.
•
Always allow the heater to cool (approx. 20min) before moving it to operate in
another location, transport or store.
•
Suitable preservation materials, such as silica gel bags or equivalent, have been
placed inside the packaging and inside the enclosure. Additionally, spare silica gel
bags, or equivalent, can be purchased by contacting EXHEAT Industrial Ltd.
CAUTION – The following preservation instructions must be adhered to, failure
to do so could result in the equipment warranty being invalidated:
•
Store the equipment at between 0°C and +40°C.
•
Do not store the equipment for more than 3 months unless packed for long term
storage.
•
If the equipment is stored beyond 3 months, ensure that preservation materials are
inspected and replaced if required.
CAUTION – It is the client’s responsibility to ensure that, if the terminal
enclosure is opened prior to installation; when refitting the terminal enclosure
lid please ensure the gaskets are not damaged or moved in any way, please
refer to section 5.
•
Protect the equipment against additional external sources of vibration and/or impact.
•
All fasteners are made from Stainless Steel Gr. 316 to prevent corrosion.
