Exhausto VEX300 Series, Сборка и инструкция по установке

Страница: 30 / 44

*Filters Only use original EXHAUSTO filters
● The provided filter data (section "Technical data") are based on the use of
original EXHAUSTO filters
● Eurovent certification is only valid if original filters are used.
● Use of non-original filters may cause leakage in the VEX unit, impair filter
function and cause an extraordinary pressure drop.
● EXHAUSTO recommends that you register the filter replacement date to en-
sure filters are replaced at the correct intervals.
**Accessory/option This component is an accessory/option and is therefore not present in all VEX
units.
5.3 Hygiene
VDI6022 air hygiene standard
To ensure that the VEX300T meets the requirements of the VDI6022 hygiene stand-
ard, its design ensures that:
● bacterial growth and dirt accumulation are minimal
● conditions for cleaning are optimum
Filter ePM
1
55%
The outdoor air side of the unit must be fitted with an ePM
1
(F7) filter to meet VDI
6022 requirements.
5.4 Service
5.4.1 Filter change
Warning
Disconnect power via the isolation switch before opening the
VEX unit.
For opening the VEX unit, see section "Opening the VEX unit".
Pull the filters out. Remember to check the flow direction - see the arrows on the fil-
ter.
Discarded filters must be stored immediately in sealed plastic bags and disposed of
responsibly.
3005993-2021-03-09
Maintenance, hygiene and servicing
30/44