manualshive.com logo in svg

EXFO CableSHARK P3, Руководство пользователя, Страница: 45 / 321

Поделиться
Скачать
EXFO CableSHARK P3 Скачать руководство пользователя страница 45

CableSHARK 

P3

 User Guide 

 

 

33

5.3.3  Renaming and Deleting Results 

 

The CableSHARK will allow a user to rename and delete results stored internally and on a USB memory 
device. 
 
By pressing the COPY/RENAME button from the RECALL SETUP screen, users can rename a file. 
 
By pressing the DELETE button from the RECALL SETUP screen, users will be prompted to decide whether 
to delete the currently highlighted file, to delete ALL results in internal memory or to delete ALL results on the 
USB memory device. 
 

 

 
NOTE: The DELETE function is not reversible. Results will be lost forever !

 

 
 

5.3.4  Bulk Transfer of Results 

 

The CableSHARK will allow a user to perform a bulk transfer of results from internal memory to USB 
memory. 
 
By pressing the COPY/RENAME button from the RECALL SETUP screen, users can transfer all internal 
results to an attached USB memory device. The time to transfer a result is approximately 500 ms. 
 
 

 

NOTE: If a filename exists already on the USB memory device, a warning message 
will appearing asking the user if they wish to overwrite the file in question. 

 
 

5.4  Reference Masks 

 

Users can designate a saved graphical result as a reference for all other similar tests to be compared 
against. This test is useful in determining how a circuit may change from day to day or week to week. This 
feature is also beneficial in evaluating similar circuits with the same benchmark criteria. Results saved to the 
CableSHARK’s internal non-volatile memory or external USB Memory can be designated as REFERENCE 
MASKS. 

 

Содержание CableSHARK P3


































































































































































































































































































































Отзывы:

Нет отзывов