manualshive.com logo in svg

EXFO CableSHARK P3, Руководство пользователя, Страница: 291 / 321

Поделиться
Скачать
EXFO CableSHARK P3 Скачать руководство пользователя страница 291

CableSHARK 

P3

 User Guide 

 

 

279

 

PC’s USB receptacle. Press Program. The PC program will install the necessary files 
onto the USB memory device. Once ready, plug this USB memory device into the 
CableSHARK and then start the upgrade process. 
 

 
EXFO commits to providing product service and repair for five years following the date of 
purchase. 
 
To send any equipment for service or repair: 
 

1.  Call one of EXFO’s authorized service centers (see EXFO Service Centers Worldwide). 

Support personnel will determine if the equipment requires service, repair, or calibration. 

 
2.  If equipment must be returned to EXFO or an authorized service center, support 

personnel will issue a Return Merchandise Authorization (RMA) number and provide an 
address for return. 

 
3.  If possible, back up your data before sending the unit for repair. 
 
4.  Pack the equipment in its original shipping material. Be sure to include a statement or 

report fully detailing the defect and the conditions under which it was observed. 

 
5.  Return the equipment, prepaid, to the address given to you by support personnel. Be sure 

to write the RMA number on the shipping slip. EXFO will refuse and return any package 
that does not bear an RMA number. 

 

Note: A test setup fee will apply to any returned unit that, after test, is found to meet the applicable 
specifications. 
 
After repair, the equipment will be returned with a repair report. If the equipment is not under warranty, you 
will be invoiced for the cost appearing on this report. EXFO will pay return-to-customer shipping costs for 
equipment under warranty. Shipping insurance is at your expense. 
 
Routine recalibration is not included in any of the warranty plans. Since calibrations/verifications are not 
covered by the basic or extended warranties, you may elect to purchase FlexCare Calibration/Verification 
Packages for a definite period of time. Contact an authorized service center (see EXFO Service Centers 
Worldwide) 

 
 
 
 

Содержание CableSHARK P3


































































































































































































































































































































Отзывы:

Нет отзывов