Exerpreutic 1301.6-083116, Руководство пользователя

Страница: 27 / 29

PROBLEM SOLUTION
The computer will not power up.
1. Check that the batteries are inserted
properly with the correct polarity (see
marking inside the battery compartment).
2. Check that the battery springs are in
proper contact with batteries.
3. Remove the old batteries and replace with
the new batteries.
There is no readings on the computer
display
Check that the Sensor Wire (31) coming out
from the Mainframe (1) is securely connected
to the wire that coming from the Computer
(32) . See Step 7 page 19.
The elliptical makes a squeaking
noise.
1. The bolts may be loose on the elliptical,
please inspect and tighten any loose bolts.
2. See page for lubrication.
Clicking Noise.
After long use, the chain may get loose and
start to have clicking noise. Open the
Right
and Left Covers (35R, 35L) to reach the Nut
(46) . Tighten the chain by screwing the Nut
(46) clockwise. Repeat for the other side.
The elliptical is not sturdy enough.
Make sure both the Adjustable Levelers (67)
are touching the ground. Make sure the
elliptical is leveled. Please refer to page 22..
Tension adjustment doesn't work.
Undo the buckle of the plastic clip and then
pull the top strap on the front of the unit away
(downward) to re-tighten the tension belt.
See page 21.
Pedal assembly is coming loose.
Make sure the bolt is secured to the foot bar
and into the crank with the nylon nut. When
tightening the bolt, make sure the bolt threads
protrude out through the nylon nut. Proper
tightness is extremely important to prevent
parts from coming loose or damage during
use. See page 12-15.
25
TROUBLE SHOOTING