Exerpreutic 1301.6-083116, Руководство пользователя

Страница: 23 / 29

Adjusting the Tension Control Knob
To increase the tension, turn the Tension Control
Knob (34) in a clockwise direction .
To decrease the tension, turn the Tension Control
Knob (34) in a counterclockwise direction.
After prolong use of the elliptical trainer, the strap will
begin to stretch out and it will become necessary to
tighten the strap for optimum performance.
1. Before tightening the strap the tension knob must be set
to its lowest setting. To do this turn the knob in a
counter-clockwise direction until it becomes difficult to
continue turning it.
2. Undo the buckle of the plastic clip and then pull the top
strap at the front of the unit away from the unit to tighten it.
Only minimal tightening should be required. Finally, lock
the buckle of the plastic clip.
3. Now with the strap tightened and without changing the
tension when you get on you should feel a slight bit of
tension (i.e. the flywheel should not turn freely). When you
are satisfied with the base level tension turn the tension
knob clockwise and continue exercising like normal.
TENSION ADJUSTMENTS
21
Tension Control Knob (34)