4. Foot Pedal Support Bracket and Left Bolt for Crank Installation
Attach the
Foot Pedal Support Bracket (72)
onto the left side of the
Foot Bar (11)
with
two
Bolts (73)
, two
Washers (74)
, and two
Nylon Nuts (75)
. Use the
Open-Ended Flat
Wrench
and
6mm Allen Wrench
to secure the
Foot Pedal Support Bracket (72)
to the
Foot Bar (11).
Lubricate the
Left Crank Bolt (15L)
with some grease provided.
Insert the
Left Crank Bolt (15L)
and
Wave Washer (36)
through the LEFT
side of the
Foot Bar (11)
. Align the
Foot Bar (11)
with the
Left Crank (80)
so that they
are
perfectly center.
Screw the
Left Crank Bolt (15L)
through the crank by turning it
CLOCKWISE
by hand until it stops, Then thoroughly tighten the
Left Crank Bolt (15L)
with the
8mm Allen Wrench
. Put a
Spring Washer (18)
on the threaded end of the
Left
Crank Bolt (15R)
and attach the
Left Nylon Nut (17L)
.Using the
Open-Ended Wrench
and
8mm Allen Wrench
, secure the
Left Nylon Nut (17L)
.
Proper tightness is extremely important to prevent parts from coming loose or
damaging the unit.
Cover
Left Nylon Nut (17L)
with
Cap (76)
.
L for left bolt
Important:
Installing left bolt into left
crank can only be done
by turning left
(counterclockwise).
Tool:
8mm Allen Wrench
Open-Ended Flat Wrench
ASSEMBLY
15
6mm Allen Wrench
2PCS
Содержание 1301.6-083116
