Exerpeutic INDOOR TRAINING BIKE, Руководство пользователя

Страница: 12 / 24

2. Seat Post, Seat Sliding Tube, Seat Cushion, and Handlebar Post Installation
Turn the Round Knob (37) on the Main Frame (1) in a counterclockwise direction until it
can be pulled out. Pull out the Round Knob (37) and then insert the Seat Post (4) into
the Plastic Bushing (38) on the tube of the Main Frame (1). Slide the Seat Post (4) up
or down direction to the suitable position. Lock the Seat Post (4) in place by releasing
the Round Knob (37) and sliding the Seat Post (4) up or down slightly until the Round
Knob (37) "pops" down into the locked position. For added safety, tighten the Round
Knob (37) in a clockwise direction.
NOTE: When adjusting the height of seat post, the MAX line cannot be higher than
the edge of plastic bushing.
Insert the Seat Sliding Tube (5) into the Seat Post Plastic Bushing (39) on the tube of
the Seat Post (4) and then attach the Round Knob (37) onto the tube of the Seat Post (4)
by turning it in a clockwise direction with the #13, #17 Double Open End Wrench
provided to lock the Seat Sliding Tube (5) in the suitable position.
Loosen both M8 Nuts (42) from underside of the Seat Cushion (41) with the #13, #17
Double Open End Wrench provided. Then install the Seat Cushion (41) onto the Seat
ASSEMBLY
Double Open End Wrench #13, #17
Tool:
11