13
ASSEMBLY
STEP 3
3a. Removal of Hardware for Installation:
Remove four
Hex Bolts (16)
, four
Spring Washers
(12)
and four
Curved Washers (10)
from the
Main Frame (1)
. Slide the
Front Post Cover (37)
onto the
Front Post (2)
before going onto the next sub step.
3b. Connecting the Pulse and Console Wires:
Connect the
Upper Console Wire (17)
from the
Front Post (2)
to the
Lower Console Wire (25)
from the
Main Frame (1)
. Connect the
Extension
Hand Pulse Wire A (18)
from the
Front Post (2)
to the
Hand Pulse Wire B (28)
from the
Main
Frame (1)
. See
Figure C.
3c. Installing the Front Post to the Main Frame:
Slide the
Front Post (2)
onto the
Main Frame
(1).
Align the holes of the
Front Post (2)
and
Main Frame (1)
. Fasten the
Front Post (2)
to the
Main Frame (1)
with the previously removed four
Hex Bolts (16)
, four
Spring Washers (12)
and
four
Curved Washers (10)
. Then tighten all the
Bolts (16)
by using the
6mm Allen Wrench
provided.
6mm Allen Wrench
1PC
TOOL
1
Figure C
Содержание 975XBT
Страница 5: ...3 LABEL PLACEMENT...
Страница 8: ...6 OVERVIEW DRAWING...
Страница 11: ...9 HARDWARE TOOLS LIST Silicon Oil 1 Bottle...
