15
ASSEMBLY
STEP 6
6a. Removing Hardware-
Remove eight
Bolts (23)
and eight
Washers (24)
from the
Back/Seat
Support Bracket (1)
and
Seat Sliding Tube (15).
Remove bolts with the
6mm Allen Wrench
provided.
6b
.
Installing the Console
-- Connect the
Extension Wires (63)
and
Extension Sensor Wire (64)
to the wires that come from the
Console (9).
Tuck wires into the
Front Handlebar Post
(6)
.Attach the
Console (9)
onto the top end of the
Front Handlebar Post (6)
with four
Bolts (39)
that were removed. Tighten bolts with the
Multi Hex Tool with Phillips Screwdriver
provided.
Tool:
Multi Hex Tool with Phillips
Screwdriver
Содержание 900XL
Страница 5: ...3 LABEL PLACEMENT...
Страница 8: ...6 OVERVIEW DRAWING...
Страница 11: ...9 HARDWARE TOOLS PACK...
