Exerpeutic 1220.2, Руководство пользователя

Страница: 10 / 24

Attach four Adjustable Levelers (19) onto the Front and Rear Stabilizer (2/3) as shown in
Fig. AA-1.
1. Front and Rear Stabilizer Installation
a.
Remove the Metal Protective Tube and all hardware. This will not be used in installation
and should be discarded.
b.
Lift up the Front of the Mainframe (1) and align the holes of the Front Stabilizer (2) with
the holes on the front bracket. Install the Front Stabilizer (2) using two Carriage Bolts (20),
two Curved Washers (21) two Spring Washers (77) and two Cap Nuts (22). Then tighten the
Cap Nuts (22) using the 13, 15mm Double Open Ended Wrench provided.
c.
Lift up the Rear of the Mainframe (1) and align the holes of the Rear Stabilizer (3) with
the holes on the rear bracket. Install the Rear Stabilizer (3) using two Carriage Bolts (20), two
Curved Washers (21) two Spring Washers (77) and two Cap Nuts (22). Then tighten the Cap
Nuts (22) using the 13, 15mm Double Open Ended Wrench provided.
ASSEMBLY
8
Hardware:
No. 20 Carriage Bolt
4 PCS
No. 21 Curved Washer
4PCS
No. 22 Cap Nut
4 PCS
No. 77 Spring Washer
4PCS
Tool:
13, 15mm Double Open
Ended Wrench
2PCS
3
20 20
2
19
19
3
19
19
20
20
21
1
21
77
77
22
22
2
21
77
22
22
77
21