Tool:
13, 15mm Double Open
Ended Wrench
4
37
41
5
5
37
3. Seat Post Installation
Turn the Round Knob (37) on the Main Frame (1) in a counterclockwise direction until it can be pulled
out. Pull out the Round Knob (37) and slide the Seat Post (4) into the slot on the back of the Mainframe (1).
Lock the Seat Post (4) in place by releasing the Round Knob (37) and sliding the Seat Post (4) up or down
slightly until the Round Knob (37) "pops" into the locked position. Tighten the Round Knob (37) in a
clockwise direction.
NOTE: When adjusting the height of seat post, the MAX line cannot be higher than
the edge of plastic bushing.
4. Seat Cushion and Seat Slide Tube Installation
a.
Install the Seat Cushion (41) onto the Seat Slide Tube (5) and tighten using the two 13, 15mm
Double Open Ended Wrenches provided as shown in Fig. AA-2.
b.
Insert the Seat Sliding Tube (5) into the Seat Post (4), and attach the Round Knob (37) onto
the tube of the Seat Post (4) by tuning it in a clockwise direction.
ASSEMBLY
10
Содержание 1220.2
Страница 2: ......
Страница 5: ...3 LABEL PLACEMENT...