Exerpeutic 1112.8-101016, Руководство пользователя

Страница: 22 / 33

10. Computer and Bottle Holder Installation
Use the Multi Hex Tool with Phillips Screwdriver to remove four Bolts (45) from the
Computer (43). Connect the Extension Hand Pulse Sensor Wires III (44) and Extension
Sensor Wire I (50) to the wires that come from the Computer (43). Tuck these wires into the
Front Post (48) and attach the Computer (43) onto the Front Post (48) with the four Bolts (45)
that were removed. Tighten the bolts with the Multi Hex Tool with Phillips Screwdriver
provided. Use the Multi Hex Tool with Phillips Screwdriver to remove two Bolts (46) from the
Front Post (48). Attach the Bottle Holder (47) onto the Front Post (48) with the two Bolts (46)
that were removed. Tighten the bolts with the Multi Hex Tool with Phillips Screwdriver
provided.
Place the two Anti-slip Rubber Pads (99) in the optimal place for your smart device (phone,
tablet etc…)
20
ASSEMBLY