GPS-110-MB-PS User’s ManualExemys
www.exemys.com
Rev. 3
11
3.
Type the commands which you want to edit its parameters with the proposed values.
4.
To finish and save all the changes, type the command 5
55
5 (END), after which device
will restart and return to normal operation.
3.1
3.1
3.1
3.1
Po
Po
Po
Port A
rt A
rt A
rt A Configuration
Configuration
Configuration
Configuration---- NMEA.
NMEA.
NMEA.
NMEA.
Port A (RS232) can be used to monitor the internal GPS operation by seeing the NMEA
sentences that the GPS sends. You can ignore this section if you are not going to use port A
NMEA (RS 232).
Command
Description
(1)-> 1
Baud Rate
(1200|…|115200)
Setting the baud rate of the Serial Port A.
•
Values: 1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600 or
115200.
Example of use:
1->1->8: 115200 bps
(1)-> 2
Data Bits
(7|8)
Setting the data bits of the Serial Port A.
• Values: 7 or 8.
Example of use:
1->2->1: 7 Data bits
(1)-> 3
Parity
(N|E|O)
Setting the parity of the port A
•
Values: None, Even, Odd
Example of use:
1->3->2: Even parity
(1)-> 4
Parse
(E|D)
Enables the interpretation of the sentences in port A.
• Disabled: The NMEA frames are displayed as they come from the GPS.
• Enabled: The NMEA sentences are decoded for a simple reading of the user.
Example of use:
1->4->1:
Interpretation Enable
