EGW1-IA3-MB-DF1 – Modbus TCP a DF1 User’s Manual
Exemys
www.exemys.com
Rev. 1
25
C.Command Console
EGW1-IA3-MB can be set through a command console connecting the device to a serial port on the PC.
To access the command console, you must connect the EGW1-IA3-MB to a RS232 port on a PC and you
must install an Exemys serial terminal program, called
Exemys Console.
Download the Exemys Console:
http://www.exemys.com/console
Once the serial terminal program is installed, connect the EGW1-IA3-MB to a RS232 port on the PC and
execute the
Exemys Console
.
1.
Click on Connection -> Serial Port, it will open a window with name of all COM Serial port. Select
with double click the port where device is connected. Verify Baud rate in the serial por is 9600.
2.
Turn on the EGW1-IA3-MB and in the first 7 seconds type CFG and press ENTER or press the CFG
button. EGW1-IA3-MB will display a welcome message on the configuration command console.
