EGW1-IA3-MB-DF1 – Modbus TCP a DF1 User’s Manual
Exemys
www.exemys.com
Rev. 1
10
Properties ...: Configuring Network Parameters (IP Address, Network Mask, and Gateway)
Configure...: Direct access to the configuration web page.
For more details on the
Exemys Device Locator
operation, see Appendix A.
3.2
Configuration web page.
Once the EGW1-IA3-MB has a valid IP address, you can access the web page to configure the other
parameters (If your web browser is configured to search for a proxy server, disable this option)
Type the EGW1-IA3-MB IP address in the address field of your browser or from the
Exemys Device
Locator
, press the Configure button.
If you configured a password, the computer will ask for it when entering the web page.
In this case, you must enter "admin" as the user and then the password that was set.
If you want to change it, you can do it from the Administrator menu
3.3
Modbus TCP configuration
On this web page you can configure
1.
Network parameters: EGW1-MB-DF1 default IP address is 0.0.0.0. Thus, unless you set a static IP
address, it will attempt to get an IP address from a DHCP server. The device tries to negotiate an
IP address with a DHCP server for a maximum period of 10 seconds. If a DHCP server fails to
answer in that period, EGW1-MB-DF1 will show an error code through the frontal LEDs (refer to
Appendix D for a list of error codes) and then it will retry other DHCP negotiations every 60
seconds. This process will be repeated until the negotiation succeeds.
Changing these network parameters through the web has the same effect as configuring the IP
address, Netmask and Gateway using EDL. Please note that if you make any change to these
