Executone Systems MEDLEY, Руководство администратора

Страница: 18 / 34

1997
14
4. SPECIFIC PROGRAMMING PROCEDURES
This chapter explains the various programming functions. (To program, you
must first enter the program mode, as explained in
Chapter 3, “General Pro-
gramming Procedures.” )
4.1
Function 1 System Parameters
Function 13 Administrator Password
This displays the existing password and prompts for a new one. The password
can be 2- to 8-digits long. Write down any new password in a safe place.
Default password = 456
Function 14 Set Time
A new time is input in a twelve hour format. Input “1233” for 12:33, or “315”
for 3:15. Select AM or PM by pressing the PARK 3 key.
NOTE: The system will maintain the correct time, even in the event of a
power loss. The date is installed at the factory and requires no updating.
Function 17 System Speed Dial
Up to 100 system speed dial names and associated numbers can be stored in
location numbers 600 to 699 for access by any station. System speed dial is
available to a station regardless of the station’s line access or toll restriction.
To enter a system speed dial number.
1. Enter the 3-digit bin number that you are programming.
2. Enter a 10-character name. This is required.
3. Enter the number to be dialed (including the line group 9, 8, or 7).
The number can be up to 30 digits long, including the characters #, *, F
(flash), or P (for a 2-second pause). These are inserted by pressing the
PARK 3 key to select the desired character. Press # to confirm the in-
serted character and continue. Press ## to complete the entry.
Press DEL to delete a number or name. To delete an entire speed dial
number and name, press DEL to delete the location number.