Page | 8
Connect the unit to the main power, press the switch to the position of I : ON, the
red operation indicator will light to indicate the heater is on and the heater will
begin to radiate infrared heat.
OPERATION INSTRUCTIONS
：
1.
Plug in the device, and then press the switch to the position of I (refer to
picture 1). The device will sound 1beep, one of the heat lamp indicators will
flash (picture 1), the device is in standby mode and the unit won’t radiate any
heat.
PICTURE 1.
2.
Point the remote control directly to the receiver, press
the “ON” button on remote, the device will sound 1
beep and the unit will start to heat in high power mode
(100% of the rated power) and all three heat lamp
indicators will turn red. Refer to the (Picture 2)
PICTURE 2
.
