Page | 14
INSTALLATION PROCESS
WARNING! Mounting of the infrared heater and its connection to the electric
mains should be carried out only by qualified specialists according to the
Electrical Installation Regulations and Power System Safety Standards
1. Open the box and carefully take the heater out.
2. Take out the packing paper sheet from the end of heater
3. Take out one pair of mounting Brackets. These adjustable brackets allow the
product to be mounted to a wall or ceiling, and come with preset angle options
of parallel, 15°, 30°, 45° and height 170mm.
4. For the correct installation process, use the diagram above for requirements.
Select the heater location on the ceiling or wall by locating the stud or
structural beams to ensure secure fastening of the heater, whilst observing the
minimum clearances from the floor and other objects.
