Page | 13
To set the timer of 13 hours, point the remote control directly to the receiver and
press 1 2 4 6 on the remote control successively, “13” will be indicated on the display
zone. This will trigger the heater to automatically go into Standby mode after 13
hours of operation. Once in Standby mode, the symbol “- - “will be flashing.
CAUTION:
1. During the timer running time, the number on the display show the remaining
time. Fox example, 13 hours timer is triggered, the display will show “11” after 2
hours running;
2. During the timer running time, the display will show the working power and the
remaining time.
l
Deactivate or reprogram the timer.
If the timer is activated, pressing the same button at the second time will
reprogram or disable the timer.
Example 1. After activating the 13 hours timer by press the button “1” “2” “4” “6”,
pressing the button“1” afterwards will reprogram the timer to (13-1) = 12 hours,
Pressing the button“2” button afterwards, the timer will be reprogrammed to (13-
2) = 11 hours. Pressing several other keys in sequence, the timer can be reset to
0, the heater goes into Standby mode and the symbol “- - “ will be flashing.
Example 2, a 6 hour timer is set by pressing button “2” “4”. Press the button “2”,
the timer is set to 6-2 = 4 hours, Press the button “4” straight afterwards, the timer
is set to 0, the heater goes into standby mode and the symbol “- -“ will be flashing.
l
CAUTION: There is a built-in safety feature that will automatically trigger the
heater to go into standby mode after eight hours of continuous operation, if the
timer is not triggered.
At this time the symbol “- - “ will be flashing to indicate the unit is in standby
mode.
