11 - ENG
A17913
BEFORE STARTING
1. Move pressure washer to level ground.
2. Make sure the ON/OFF switch is in the OFF position
To reduce the risk of electrocution, keep all connections
dry and off the ground. Do not touch plug with wet hands.
Do not use if cord is damaged.
3. Plug the unit into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances. See the
GROUNDING paragraph.
4. Press reset button and indicator light (a) will appear. You will have one of
the following GFCI switches shown below.
READ AND UNDERSTAND ALL WARNINGS BEFORE STARTING UNIT
Risk of fluid injection and laceration. When using the high
pressure setting, DO NOT allow the high pressure spray to
come in contact with unprotected skin, eyes, or with any pets or animals. Seri-
ous injury can occur.
Your washer operates at fluid pressures and velocities high enough to
penetrate human and animal flesh, which could result in amputation or other
serious injury. Leaks caused by loose fittings or worn or damaged hoses can
result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE
CUT! See a physician immediately!
Never pull water supply hose to move pres sure washer. This
could damage hose and/or pump inlet.
DO NOT use hot water, use cold water only.
Never turn water supply off while pressure washer motor is running or damage
to pump will result.
This unit is equipped with an automatic stop mode. When the trigger is
released the motor is shut off automatically. When the trigger is pressed again
the motor will automatically start. The time between release and engagement
must not be less than 4-5 seconds. DO NOT leave the unit in automatic stop
mode for more than 15 minutes.
Stand on a stable surface and grip gun/wand firmly with both hands. Expect
the gun to kick when triggered.
This product is intended for intermittent use only. Operate pressure washer
one hour or less in a 2 hour period.
For outdoor use only. Store indoors.
If you do not understand these precautions please call 1-866-422-4286 to
speak to a service representative for further instructions.
c
b
a
a
c
b
a
c
b
