- Users
Instructions
SECTION THREE
Warning:
-Before you clean any part of the appliance ensure that the appliance is turned off
and cool
.
CLEANING: DECORATIVE TRIM
•
The finish of
t
he trim is coated with a high temperature
lacquer
,
it can be wipe with a soft,
clean
,
dry
,
cloth only.
•
The trim should be removed for cleaning. The fret should be removed before removing the
trim
,
which is held in place by four magnetic strips.
CLEANING: BLACK PAINTED SURFACES
•
These surfaces should be dusted regularly and any marks removed with a soft cloth.
•
Abrasive or chemical cleaner should never be used.
CLEANING COALS
Important: - Refer to the 'Heath
&
Safety Notice located on page 3 of this
booklet before cleaning or replacing any refractory material.
The coals are delicate and they should be handled with great care.
The loose coals may be removed for cleaning. They can be brushed very gently with a soft
brush to remove dust or any deposits.
Care should be taken to avoid contact with the refractory lining, this is a delicate surface and
should
not
be wiped or rubbed.
A vacuum cleaner may only be used after all the loose coals have been removed.
SECTION FOUR
It is important
that all the coals and moulded
shapes are positioned
as shown
i
n these
instructions.
5
7901
•
Thin coal
Front matrix