Excalibur DAS-429PCI/Mx Скачать руководство пользователя страница 34

Страница: 34 / 74

Chapter 2

Module Operation

DAS-429PCI/Mx: User’s Manual

page 2 - 9

Read/Write

The Channel Interrupt register indicates which channel issued the interrupt

(1 = Active). Reset the status bits by writing to this register or to the reset

Write

The Receiver Data Storage Mode register is used to select the Receiver Data

Storage Mode and the Merge Mode option. ARINC-429 data words can be stored

with Time Tag and Status words appended to the data block or they can be

stored without these additional words. Set bit 00 to a logic 0 to select the

standard mode which appends both Time Tag and Status Words to each ARINC-

429 word stored in memory. Set register bit 00 to a logic 1 to select

Data Only mode.

Bit 01 controls the Receiver Merge Mode selection. A logic 0 selects the standard

independent mode which utilizes different receive buffer areas for each receive

channel. A logic 1 selects the

Merge Mode

which utilizes a single receiver buffer for

all channels. Each Receive Status Word, in this case, is tagged with Channel

Code information. The Merge Module Control registers are used only when the

Merge Mode option is selected (See

Receiver Merge Mode Control Registers,

page 2-11).

Note:

1. If Data Only Storage Mode is selected (bit 00 set to 1), storage will be

per independent channel regardless of the state of bit 01.

2. Data Only Storage Mode is not available in Lookup Table Mode.
3. The Receiver Data Storage Mode register can only be changed when all

channels are turned off (Start/Stop register = 0).

4. Merge mode merges the 4 receive channels in each bank.

2.4.4

Channel Interrupt Register

Address:

0016 (H)

Bit

Bit Name

06-15

Reserved

Channel 5 Interrupt Bit

Channel 4 Interrupt Bit

Channel 3 Interrupt Bit

Channel 2 Interrupt Bit

Channel 1 Interrupt Bit

Channel 0 Interrupt Bit

Channel Interrupt Register

2.4.5

Receiver Data Storage Mode Register

Address:

0018 (H)

Bit

Description

02-15

Merge Mode Option
0 = Independent Mode
1 = Merge Mode

Receive Data Storage Mode
0 = Standard Mode
1 = Store Only Data

Receiver Data Storage Mode Register

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание DAS-429PCI/Mx











































































Результаты поиска

Содержание DAS-429PCI/Mx

Отзывы:

Похожие инструкции для DAS-429PCI/Mx

Бренды по названию

Популярные бренды

Excalibur DAS-429PCI/Mx, Руководство пользователя

Результаты поиска

Содержание DAS-429PCI/Mx

Отзывы:

Похожие инструкции для DAS-429PCI/Mx

Бренды по названию

Популярные бренды