Excalibur DAS-429PCI/Mx Скачать руководство пользователя страница 37

Страница: 37 / 74

Chapter 2

Module Operation

page 2 - 12

Excalibur Systems

Read/Write

The Receiver Merge Buffer Wraparound register contains 2 bits for

synchronization with the host. If bit 14 is set to 1, the receive buffer has wrapped

around once since the last time this register was cleared. If bit 15 is set to 1,

there have been multiple wraparounds. Clear bit 14 each time the first word of

the buffer is read. When the module wraps around it checks bit 14. If bit 14 is not

set the module sets it, otherwise the module sets bit 15.

Note:

Excalibur C drivers handle these bits. If you use these drivers, you don’t

need to deal with them.

Write

The Receiver Merge Word Count Trigger register lets the user generate an

interrupt and set a flag which indicates when a specific number of words have

been received (1 - 65535). To generate an interrupt, the appropriate bit in the

Receiver Merge Interrupt Condition Register must also be set. (See

Receiver Merge

Interrupt Condition Register,

page 2-14.)

Note:

This trigger is set when the value in the Receiver Merge Word Counter

matches the value set in this register.

Write

The Receiver Merge Interval Count Trigger register (a 16-bit value) lets the user

generate an interrupt and set a flag upon reception of every “n” number of words,

where “n” is the value written to this register. For example, to request an

interrupt after every 5 ARINC words, write 05 to this register. If you want to

generate an interrupt, you must also set the appropriate bit in the Receiver

Merge Interrupt Condition Register. (See

Receiver Merge Interrupt Condition Register,

page 2-14.)

2.5.6

Receiver Merge Buffer Wraparound Register

Address:

002A (H)

Bit

Description

Multiple Wraparound - Data Lost

Single Wraparound

00-13

Receiver Merge Buffer Wraparound Register

2.5.7

Receiver Merge Word Count Trigger Register

Address:

002C (H)

2.5.8

Receiver Merge Interval Count Trigger Register

Address:

002E (H)

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание DAS-429PCI/Mx











































































Результаты поиска

Содержание DAS-429PCI/Mx

Отзывы:

Похожие инструкции для DAS-429PCI/Mx

Бренды по названию

Популярные бренды

Excalibur DAS-429PCI/Mx, Руководство пользователя

Результаты поиска

Содержание DAS-429PCI/Mx

Отзывы:

Похожие инструкции для DAS-429PCI/Mx

Бренды по названию

Популярные бренды