Excalibur AL-560, Руководство по установке

Страница: 11 / 34

Page 10
To access Features Programming Mode:
Step 1:
Turn the vehicle’s ignition “On” then “Off”.
Step 2: Within 7 seconds of turning the ignition “Off”, press the Valet Switch
5 times. The siren will wolf once confirming entry to Features Programming
Mode.
Step 3: Within 10 seconds of entering Features Programming Mode, press
the Valet Switch the number of times equal to the number of the feature to be
programmed. The siren will repeat the feature number with chirps to confirm.
Step 4: After the system acknowledges the feature to be programmed:
- press the “Lock” button on the remote to turn the feature “ON” (the siren will
chirp once), or,
- press the “Unlock” Button to turn feature “OFF” (siren will chirp twice).
Note: Once the feature to be programed is selected, you can toggle the
feature between its settings by pressing the “Lock” & “Unlock” buttons
on the remote control.
- To program more features, simply repeat Steps 3 and 4.
- If 10 seconds expire without any programming activity, or if the vehicle’s ig -
nition is turned “On”, the alarm will automatically exit Features Programming
Mode. The siren will confirm exit.
The alarm has 15 programmable features which allow it to be customized to
suite many individual needs. The following pages provide a brief explanation
for each feature, and notes its factory default setting.
• = Default Factory Setting
1. Auto-Rearm : ( •On = 1 siren chirp / Off = 2 chirps)
- Allows the Alarm to Rearm itself, if it is Disarmed.
2. Last Door Arming : (•On = 1 siren chirp / Off =2 chirps)
- Configures the alarm to automatically arm itself 30 seconds after the last
door is closed with the ignition “Off”.
3. Doors Lock w/ Last Door Arming : (•On = 1 siren chirp /Off = 2 chirps)
- Adds the automatic locking of the vehicle’s doors to the previous feature.
How to Program Features
Programmable Features