Excalibur AL-185X-EDPB, Руководство по эксплуатации

Страница: 13 / 25

13
1) Press the “P” button for 5 seconds to access the controller features. The controller
will beep twice
2) Press and release the “P“ button once to select the clock (hour digits will flash).
3) Press the “TRUNK“ button to scroll up or the “ “ button to scroll down
4) Press the “P” button to switch to the minute digits
5) Press the “TRUNK“ button to scroll up or the “ “ button to scroll down
6)
Wait 10 seconds or press the “P” button for 5 seconds to exit programming. The
controller will beep once
SeTTing The ClOCK
The controller has 5 different melodies to choose from for remote start ON and 5
melodies for remote start OFF confirmation.
1)
Press the “P” button for 5 seconds to access the controller features. The controller
will beep twice
2) Press and release the “P“ button 3 times to select the melody settings The clock
will change to “01 STRT” indicating “start melody #1” for the remote start ON melody.
3) Press the “TRUNK“ button or the “ “ button to scroll through the melodies
4)
Press the “P” button to switch to the remote start OFF melody selection
5) Press the TRUNK button or the “ “ button to scroll through the melodies
6) Wait 10 seconds or press the “P” button for 5 seconds to exit programming. The
controller will beep once
Changing RemOTe STaRT melODieS
Controller Options (cont’d)
SeleCTing melODy & VibRaTe mODeS
Whenever 2-way alerts are received from the system, the controller can alert you
with a melody, vibration, or both. By default, the controller is set for melody only.
Press the “P” and “TRunK“ buttons simultaneously for 1 second to change the
setting.
The controller has 2 convenient timer functions. The PARKING TIMER tells you
how long you’ve been parked in case you are at a parking meter or other parking
areas with time restrictions The REMOTE START TIMER tells you how long your
engine has been running in remote start mode
PaRKing TimeR: Press LOCK twice within 5 seconds When the controller receives
both LOCK confirmations, it will start the timer.
RemOTe STaRT TimeR: This turns on every time you remote start
note: Pressing the “P” during either timer will switch to the clock.
PaRKing TimeR & RemOTe STaRT TimeR
*
*
*
*
You can lock the buttons on the controller to prevent accidental button presses
To lock the buttons, press “ P ” and “ “ simultaneously for 1 second. Repeat this to
unlock the buttons
buTTOn lOCK
*
This feature turns off the screen after 15 seconds of no activity to save battery life.
1) Press the “P” button for 5 seconds to access features. The controller beeps twice.
2) Press the “P“ button 5 times to select “Power Save” (clock reads “PS ON”)
3)
Press the “TRUNK“ button to change between “PS ON” or “PS OFF”
4) Wait 10 seconds or press the “P” button for 5 sec. to exit programming.
POWeR SaVe mODe