Excalibur AL-1830-EDPB, Руководство по эксплуатации

Страница: 7 / 24

7
1
2
Controller & Transmitter Functions (cont’d)
AUXiLiARy FUnCTiOnS 1-4 :
The actual operation of these functions will vary from car to car. They are designed
to operate extra vehicle functions like automatic sliding doors or motorized hatches.
Aux 1-4 are virtual outputs only available on certain vehicles when this system is
integrated with the vehicle’s data network. Consult with your installer to find out if any
of these functions are available for your vehicle. If so, confirm each operation with the
controller and write each function in the blank spaces provided below.
- Auxiliary 1 Function (___________________) : To activate this function, press
and release the “ trunk ” and “ start ” buttons simultaneously)
- Auxiliary 2 Function (___________________) : To activate this function, press
and release the “
lock
” and “
trunk
” buttons simultaneously)
- Auxiliary 3 Function (___________________) : To activate this function, press
and release the “ unlock ” and “ start ” buttons simultaneously)
- Auxiliary 4 Function (___________________) : To activate this function, press
and release the “ unlock ” and “ trunk ” buttons simultaneously)
SEnSOR ByPASS: Press and release the “ ” button within 5 sec-
onds of locking/arming the alarm system.
ThE SYSTEM WILL gIVE OnE ChIRP TO InDICATE •
ThE SEnSOR IS BYPASSED
UPOn RECEIVIng COnFIRMATIOn FROM YOUR •
SYSTEM, ThE COnTROLLER WILL ALSO ChIRP OnCE
& DISPLAY ThE SEnSOR ICOn
(1-way transmitter: press anD release the
“||” button within 5 seConDs of arming the
system)
This feature will automatically start the engine should the vehicle battery drop
below 11 volts or the interior temperature drop to 15 (or 32) degrees fahrenheit. This
feature is very useful when the vehicle is parked for a long period of time in cold
climates. You must activate these features each time you park your car to use them.
• Turn the ignition switch “on”, then “off” (engine not running), and within 7 seconds
press the valet switch twice. If there is a 2 second delay without additional valet but -
ton presses, the horn will honk 3 times activating low voltage start mode
• To activate low temp starting, enter low voltage start mode as described above
but, before the horn honks, press the valet switch 1 time (15 degrees) or 2 times (32
degrees) within 5 seconds. The horn will honk to confirm your selection.
nOTE: When low temp start mode is activated, low voltage start is also activated
These features will operate once every two hours until the ignition key is turned “ON”.
LOW BATTERy/LOW TEmP AUTOmATiC STARTinG
Other Remote Start Features